It was not long ago that we shared the news regarding Apple officially activating its Bluetooth hardware, via the 5.2 update, on their Apple TV 2 and Apple TV 3 devices. Though it seems that support is limited to Bluetooth keyboards, not Bluetooth remotes, only time will tell if Apple has a line of new peripherals on the way for us all. As exciting as the news is, having Bluetooth capabilities does no good if users are unsure/unable to utilize these features.

We also want to remind those of you that own an Apple TV 1, the silver box, that this guide will not pertain to your device as you have no Bluetooth hardware enabled by default. If you own an Apple TV 1, and would like Bluetooth support, you will need to look into other LINUX-based options (see our guide on installing openELEC) paired with Bluetooth dongles.

REQUIREMENTS

1. Bluetooth keyboard
2. Apple TV remote (hardware or software)
3. Apple TV (2nd or 3rd generation) updated to the latest 5.2 firmware
4. A desire for your media center to have additional awesomeness

LIMITATIONS (according to Apple)

1. Bluetooth support on Apple TV is for keyboards only. Headsets, speakers, and other devices are not supported.
2. If you are having difficultly connecting or using a third-party Bluetooth keyboard, contact the manufacturer to verify that it is compatible with Apple products and Apple TV.
3. The original Apple Wireless Keyboard (2003), that features a white case and uses four AA batteries, is not compatible.

PAIRING

The first thing we need to do, as is the case when using any Bluetooth devices, is “pair” our hardware. Pairing is simply the process of connecting the two devices to each other, therein allowing them to communicate with each other.

1) From your main menu, navigate to the Settings -> General -> Bluetooth

3) At this point, let’s go ahead and turn on the keyboard and set it in “pairing mode”

5) You will immediately see the word “Bluetooth” at the top of your screen with the word “Searching” next to it.

6) In a matter of seconds you should see your Bluetooth keyboard’s name pop up on your Apple TV.

7) Using the Apple TV remote, click on the name that represents your Bluetooth keyboard.

8) You are now met with a sequence of 4 numbers: type these IN ORDER on your keyboard.

9) Congratulations, your keyboard is now paired with your Apple TV.

HOW TO USE

Now that your keyboard is paired with your Apple TV, everything can be controlled by either the keyboard or your Apple TV remote. So, let’s assume that you now want to put away your remote and control your system via the keyboard – here are the basic keys that you would be looking for:

You can use your keyboard to:

• Enter text and other information (search, email addresses, passwords, and so on)
• Navigate Apple TV menus using the arrow, Return, and Escape keys
• Navigate recently updated aTV Flash (black)
• Jump to an item, title, or name on the screen by typing the first few letters (for example, when viewing your music collection, you can type a song title or artist name to jump to it in the list)
• Use media controls when playing music and video to play or pause content and select previous or next.

Volume, brightness, and other controls are not available for Apple TV. Apple TV uses the U.S. English keyboard layout regardless of the keyboard’s hardware layout.

DISCONNECTING

If you want to stop using your keyboard or disconnect it from the Apple TV:

• Select Settings -> General -> Bluetooth
• Select your keyboard and then select “Forget this device”

(This article is also available in Spanish / Este artículo también está disponible en español)

The post How to add and use a Bluetooth keyboard with your Apple TV (5.2/iOS 6.1) appeared first on Apple TV Hacks.

The FireCore team’s aTV Flash software, known as “black”, has recently been updated to version 2.2. This update incorporates support for Apple’s latest 5.2 software update (iOS 6.1), which officialy opened up support for Bluetooth devices to pair with your Apple TV. This is very exciting for those of you who had accidentally, or perhaps purposely, updated your black boxes in the past weeks. For those of you who have not yet updated your device, you need to consider one important question prior to clicking that software update option. The question before you is simply: “do I use Plex, Remote HD, Rowmote, or XBMC on my Apple TV?” If your answer is yes you may want to hold off on the Apple update as Apple’s latest software update also breaks these tools. We are sure this will be fixed, but as of now any Apple TV running 5.1 or higher will not have access to the items listed above.

That aside, aTV Flash (black) 2.2 has some exciting features for those of us already on the latest update. They have managed to integrate the Bluetooth keyboard functionality into all of their special features and additions to iOS. This means you get a fell keyboard experience while surfing the web, navigating their menus, and searching for content.

Other things we will see in aTV Flash (black) 2.2 update:

• Minor improvements to backups
• Minor improvements to DVD playback
• A handful of other bug fixes and improvements

WHAT DOESN’T WORK

3rd party plugins such as:

• XBMC
• Plex
• Remote HD
• Rowmote

are not yet compatible with the 5.1+ Apple TV software.

@thomashw, the developer of Plex client for Apple TV, has already confirmed on Plex forum that he will work on getting Plex working on the latest Apple TV software.

XBMC Developer Memphiz said on XBMC forum that the team is “trying their best” to make XBMC running on Apple TV 5.2. XBMC now available on iOS 6.1 for Apple TV

WHAT WORKS

Taking a look at the features/tools that typically comes with aTV Falsh (black), and subtracting the third-party software options/tools which are broken by Apple’s 5.1+ update, we are left with the follow list:

• AirControl
• Couch Surfer Pro
• Last.fm
• Maintenance
• Media Player
• RSS Player
• RSS Feeds
• Weather

HOW TO UPDATE

aTV Flash (black) 2.2 is compatible with any and all ATV2s running a minimum of 4.4 and up, so updating to 5.2 is not required. However, if you are wondering what the best way is to update, who better to listen to then the FireCore team themselves:

1. Backup your settings through the Maintenance > Manage Backups menu.
2. Run the latest version of Seas0nPass to update the Apple TV to 5.2.
3. Download and install the new 2.2 version of aTV Flash (black).
4. Install any desired items through the Maintenance > Manage Extras menu.
5. Restore the previously saved settings through the Maintenance > Manage Backups menu.
   
6. That’s it!

If you’re not yet using aTV Flash (black) you can get started here.

The post aTV Flash (black) update v2.2 includes support for Apple TVs on 5.2: what features/plugins work and what doesn’t? appeared first on Apple TV Hacks.

Following the last week’s release of evasi0n iOS 6.0-6.1 jailbreak, FireCore has updated its Seas0nPass to provide an untethered jailbreak for Apple TV 2 running the latest 5.2 (iOS 6.1) firmware. Released in January, Apple TV software update 5.2  for the 2nd and 3rd generation Apple TV added Bluetooth keyboard support, iTunes in the Cloud and AirPlay audio for videos.

Some 3rd party plugins such as Plex, Remote HD and Rowmote are not yet compatible with the 5.1+ Apple TV software. The developer of Plex client is already working on getting its plugin working on the latest Apple TV firmware.

Update: XBMC now available on iOS 6.1 for Apple TV

aTV Flash (black) has also been updated and now supports Apple TV 5.2.

NOTE: The current version of Seas0nPass doesn’t provide a jailbreak for the Apple TV 3.

Here is a step by step tutorial on how to untether jailbreak Apple TV 2 5.2 using Seas0nPass:

Pre-launch checklist

1. Download and install the latest version of iTunes (check for updates through Software Update located in Apple menu).
2. Download Seas0nPass for Mac [10.6 or later] or Windows [XP or later].
3. A micro USB cable will be required to complete the jailbreak.
4. Disconnect any iPods, iPhones, and iPads from your computer.

Jailbreaking

Step 1: Unzip the ‘Seas0nPass.zip’ file and launch Seas0nPass.

Step 2: Select the ‘Create IPSW’ button to start the jailbreak process.

Step 3: The latest Apple TV software will be downloaded and used to create a custom ‘jailbroken’ software file.

Step 4:When prompted, connect your Apple TV using a micro-USB cable (leave power disconnected).

Once the light on the front of the Apple TV begins to flash rapidly, point the remote at the AppleTV and hold both the MENU and PLAY/PAUSE buttons for 7 seven seconds.

Note: This step will require the silver (aluminum) Apple TV remote that was included with the ATV2. The older, white (plastic) remotes will not work.

Step 5: iTunes will open automatically and start the restore process.

Step 6: iTunes will confirm the restore when complete – your Apple TV is now jailbroken.

Note: To confirm the jailbreak was successful a (temporary) red FC logo will appear in the lower right corner of the screen – as shown below.

Enjoy!

Be sure to follow us on Facebook, Twitter or Google+ for the latest updates on Apple TV 3 jailbreak status.

The post How to jailbreak Apple TV 2 5.2 (iOS 6.1) using Seas0nPass (untethered; Mac & Windows) appeared first on Apple TV Hacks.

aTV Flash (black) seems to be almost ready for 5.2 but there is still a lot of work ahead for the developers of other Apple TV software/plugins:

Please keep in mind that while the FireCore plugins will work on Apple TV 5.1, a few minor adjustments (which are currently in progress) are needed to ensure things continue to run smoothly on Apple TV 5.2. Things like Plex and XBMC do not yet work on Apple TV 5.1 and later, and will likely require A LOT of work by their respective developers in order to be compatible.

@thomashw, the developer of Plex client for Apple TV, has already confirmed on Plex forum that he will work on getting Plex working on the latest Apple TV software.

You can jailbreak your Apple TV 2 running software version 5.2 using recently updated Sn0wbreeze 2.9.8 but jailbreaking is a bit pointless at this moment as most of the plugins are still not combatible with the latest Apple TV firmware.

We will let you know once any of ATV tweaks/plugins is updated for iOS 6 and available.

The post FireCore working on updating Seas0nPass to support Apple TV 2 5.2 (iOS 6.1) jailbreak appeared first on Apple TV Hacks.

Most of the software like XBMC, aTV Flash (black), Plex, etc. is not yet compatible with Apple TV 5.1 – 5.2 and the device constantly crashes when attempting to install additional software from nitoTV, so we definitely don’t recommend updating to iOS 6.x.

Other known bug/issues:

• First boot on an AppleTV 2 for 5.1/5.2 firmwares has funky glitches. Should be fixed by updates pushed via repos.

If for some reason you still wan’t to update to iOS 6 and then jailbreak using Sn0wbreeze, you can download it from here (Windows only).

We will let you know once any of ATV tweaks/plugins is updated for iOS 6 and available.

Sn0wbreeze doesn’t support Apple TV 3.

The post Sn0wbreeze 2.9.8 released with support for untethered iOS 6.x jailbreak on Apple TV 2 (confirmed) appeared first on Apple TV Hacks.

UPDATE: Although it has been confirmed by @MuscleNerd that evasi0n would support Apple TV 2, it seems that it doesn’t. Based on earlier news from evad3rs team, we believed their jailbreak was compatible with Apple TV 2 when publishing the below post just a few minutes after evasi0n went live. We are very sorry for causing confusion. We now have to wait for Seas0nPass to be updated with iOS 6.x support for Apple TV 2. We believe it won’t take long.

UPDATE 2: How to jailbreak Apple TV 2 5.2 (iOS 6.1) using Seas0nPass (untethered; Mac & Windows)

Evad3rs, a group of four top iOS hackers (@pod2g, @musclenerd, @pimskeks and @planetbeing) has just released a long-awaited evasi0n jailbreak for all iDevices running iOS 6.0 through 6.1, that include Apple TV 2 running software version 5.1, 5.1.1 or the latest 5.2. This is an untethered jailbreak, meaning you will be able to reboot your Apple TV without attaching it to a computer. Evasi0n jailbreak doesn’t support Apple TV 3 (however, there is some hope that it will in the future).

Here are the direct download links:

• evasi0n jailbreak for Mac OS X
• evasi0n jailbreak for Windows
• evasi0n jailbreak for Linux

Official mirrors.

Requirements:

• 5 minutes of your time
• A computer running Windows (XP minimum), Mac OS X (10.5 minimum) or Linux (x86 / x86_64)
• An Apple TV 2 running iOS 6.0 through 6.1 (Apple TV firmware 5.1 through 5.2)
• A micro USB cable to connect ATV to the computer

Apple TV 2 running iOS 5.x (atv software version 5.0.2 and earlier) can be jailbroken using Seas0npass.

The post Evasi0n iOS 6.x untethered jailbreak for Apple TV 2 released (updated) appeared first on Apple TV Hacks.

Apple has just released Apple TV software update 5.2 for the 2nd and 3rd generation Apple TV, adding Bluetooth keyboard support, iTunes in the Cloud and AirPlay audio for videos. The update also includes some performance and stability improvements with the iTunes Store, AirPlay, Netflix, iTunes Match, and wired Ethernet connections.

Apple TV 2 users waiting for iOS 6.1 jailbreak should not upgrade until evad3rs team says the update is safe. We will keep you updated.

Here is what’s new in 5.2:

• iTunes in the Cloud: Browse and play your purchased iTunes music directly from iCloud.
• Bluetooth keyboard: Use your Apple Wireless Keyboard to control your Apple TV. See this article for more information.
• AirPlay audio for videos: Send stereo audio from movies, TV shows, and other videos on Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs).
• Stability and performance: Includes performance and stability improvements with the iTunes Store, AirPlay, Netflix, iTunes Match, and wired Ethernet connections.

Be sure to follow us on Facebook, Twitter or Google+ to be first to know when the untethered jailbreak for Apple TV 2 5.2 comes out.

The post Apple TV software update 5.2 brings Bluetooth keyboard support, iTunes in the Cloud and AirPlay audio for videos appeared first on Apple TV Hacks.

Update: MuscleNerd has just confirmed that Apple TV 2 will be covered by the iOS 6.1 jailbreak.

iOS hacker @MuscleNerd has confirmed on Twitter that the upcoming untethered iOS 6.1 jailbreak will support all iOS 6.1 compatible devices, except Apple TV 3. If Apple releases a software update for Apple TV 2 in time, which MuscleNerd claims is very likely, this device will also be supported. Untethered jailbreak for iOS 6.1 is expected to be released by evad3rs team just after Apple releases the latest version of its mobile OS to the public.

Asked if the upcoming iOS 6.1 jailbreak will support Apple TV 3, MuscleNerd responded:

@arovik nope, sorry. In fact unless Apple pushes a final atv2 in time, it may not apply there either (*very* likely they will though)

— MuscleNerd (@MuscleNerd) January 28, 2013

@unicornhacker yes, every other 6.1 device variation will be supported. All TWENTY-TWO of them (omg!). Plus atv2 if it’s out in time.

— MuscleNerd (@MuscleNerd) January 28, 2013

Hopefully, according to the hacker, there is still some hope for those desperately waiting for the Apple TV 3 jailbreak:

@arovik not necessarily.Although atv3 uses far fewer services that can be tampered with, it’s not isolated.But it can’t use this next JB

— MuscleNerd (@MuscleNerd) January 28, 2013

@sigboe that’s a valid area to be looking for atv3.And it certainly uses WebKit too for iTunes Store, Hulu logins etc.More esoteric tho

— MuscleNerd (@MuscleNerd) January 28, 2013

@sigboe my gut feeling though is that the code behind Photo Stream is riddled with bugs that might be useful on atv3

— MuscleNerd (@MuscleNerd) January 28, 2013

Be sure to follow us on Facebook, Twitter or Google+ to be first to know when the untethered iOS 6.1 jailbreak and Apple TV 3 jailbreak come out.

The post Untethered iOS 6.1 jailbreak will most likely support Apple TV 2, Apple TV 3 still waiting for its turn but there’s some hope (updated) appeared first on Apple TV Hacks.