Just in case you were unaware, XBMC has finally released an Eden copy of XBMC for your old Apple TV (1^st generation). Though this 1^st gen device is not the easiest to load XBMC on to, it is by no means impossible. If you simply follow these steps, from beginning to end, you will be enjoying unlimited multimedia goodness in no time.

Before we start, there are some basic requirements that are absolutely necessary for this installation process.

• Computer (Windows or MAC)
• USB port and ATV USB Creator  (grab it from the link provided and download it to your machine)
• A Flash Drive (USB Stick) that is a minimum 512MB.
• A 1^st Generation Apple TV that has been updated to the latest software, version 3.0.2!

BE SAFE: To be on the safe side, make sure that you have unplugged all other USB drives from your computer before continuing. USB Creator does erase whatever drive you are using, so you want to make sure there is nothing vital loaded on any devices plugged in once we begin.

1. Download the ATV USB Creator and save it onto your system.

2. Insert your flash drive into your computer and format it to FAT32. Be aware that this step will erase anything located on your USB stick.

3. Open and run the ATV USB Creator software that we downloaded in step #1.

4. Once the software opens up, select the following options:

– Where you see “Choose an Installation” select “ATV-Patchstick”

– You don’t need to do anything for “Download AppleTV Update DMG or Choose a DMG”. ATV USB Creator will automatically download this file from Apple’s servers, so you don’t need to do anything there.

– For “Installation Options” you should not need to change anything. “AppleTV version 3.x” should already be selected, and there should already be check marks for “ssh tools”, “bin utils”, “SoftwareMenu”, and “XBMC/Boxee for Mac”

– For “USB Target Device” select the USB drive you plugged into your computer in step #2. You may need to hit the refresh button for it to show up. Now you can click on “Create Using ->”

– When the USB drive patchstick is done being created you can then remove it from your computer.

5. Unplug your Apple TV and insert the USB drive patchstick into the back of your device.

6. With the flash drive plugged into the back of your Apple TV, plug the power cable back in. As the Apple TV begins to power up it should now be loading from the flash drive. Now we will wait for the picture of a Penguin (Tux) sitting on an Apple TV. If you do not see this picture when you boot up, and the Apple TV 1 just boots up normally, you likely need to create a new USB drive patchstick using a different USB drive (preferably using a different brand). This problem isn’t often, but it does happen.

7. After the installation is finished, the screen will say that you can reboot. When you see this screen, remove the USB drive patchstick and then unplug (& then) re-plug the power chord to your Apple TV. This will reboot your device.

8. You now have ALL KINDS OF GOODNESS installed on your Apple TV. This is most noticeable in the fact that you now have a new option on your HOME SCREEN Menu Bar named “Launcher”

9. From your Home Screen, navigate to the option labeled “Launcher”. Once there continue to “Downloads”, and then select XBMC. This may show more than one entry for XBMC, if so, select the option that says “Stable”.

10. If you are one of the lucky people who have opted to install a new Crystal HD card you should visit stmlabs.com to get more information on Crystalbuntu. It is a different software… that is installed in the exact same manner as the steps listed above.

11. Finally, from the “Launcher” section, head “XBMC” in the sub-menu to start XBMC.

12. Enjoy some amazing new features.

umOuch (Andrew Brasher)

You may also want to read:
XBMC 11.0 Eden for Apple TV 2 5.0 (iOS 5.1) released (+how to install tutorial)
How to jailbreak Apple TV 2 5.0 (iOS 5.1) with Seas0nPass (tethered)
XBMC 11.0 Eden for Apple TV – Review

The post How to install XBMC 11.0 Eden on first-generation Apple TV appeared first on Apple TV Hacks.

Patchstick.ca

You will need to have your atv2 already jailbroken and an active AppleTV 2G account at patchstick.ca in order to make use of this new software. Installer is already available for pre-order at the special price of $19.99 which also includes lifetime updates.

The post Patchstick.ca to Release Installer for Apple TV 2 appeared first on Apple TV Hacks.

In case you didn’t have enough fun hacking your boxes for 3.0 update, here it comes…another “revolutionary” update. Apple says it prevents content from temporarily disappearing. According to them, when you have to update to 3.0.1? “When you are using Apple TV software version 3.0 and all of your movies, TV shows, and songs appear to be missing” or “When you are using Apple TV software version 3.0 and all of your movies, TV shows, and songs appear to be present, but you have not yet updated to Apple TV software version 3.0.1.” Interesting… Wasn’t it easier with “Don’t think too much, update your box immediately!”…?

Official Apple instructions here.

– XBMC launched beta 3 of Launcher 3.2.
We can confirm now – it’s compatible with 3.0.1

– Boxee says it is already working in 3.0.1 (with Launcher 3.2 beta 3)
Also confirmed.

– nitoTV released 0.8.2 version with 3.0.1 support
(RSS, USB and watchdog patches updated for 3.0.1 as well)

– aTV Flash released 4.0.1 version with 3.0.1 compatibility.

– Patchstick 3.0.1 is also available (with Sapphire and RSS)
You need to use LaunchMore version 0.4 or 0.4.1 to apply this update.

The post Apple TV 3.0.1 update appeared first on Apple TV Hacks.

nitoTV

Released yesterday, 0.8.1 version (direct download) now supports 3.0 update.

nito says some features may have no chance of making it back in. Couchsurfer and RSS are not working, but they have restored the functionality for DVD, MPlayer, QuickTime, Weather, Network, download, installer and Application Launching sections.

Audio volume and sub toggling and resume returns in QuickTime playback! It is possible to turn off the volume control in General settings if this is not a desirable feature.

Guys warn things may be a little buggy from the OS transition.

Follow nitoTV thread at Hackint0sh.org

XBMC

Launcher 3.2 beta 1 (beta 2 is already on the way!) works with 3.0. However the new version is not ready for public use, and only people who are comfortable with the command line should install it.

Installing:
1) “patchstick” the 3.0 ATV
2) ssh into it and download Launcher-3.2.beta2-debug.run
3) install Launcher chmod +x Launcher.. ; ./Launcher-3.2…
4) install XBMC with Launcher or just re-symlink your old install (ln -s /Users/frontrow/Applications/XBMC.app /Applications/XBMC.app)
5) run XBCM

XBMC forum thread

Boxee

Today XBMC guys made it possible to run Boxee on ATV 3.0.

That’s how to do it:
1) “patchstick” the 3.0 ATV (You should just use your old patchstick you used previously on the ATV )
2) ssh into it the ATV and download 3.2 Launcher
Type:
wget https://dl.getdropbox.com/u/858897/XBMC/Launcher-3.2.beta2-debug.run

3) Install the Launcher
Type:
chmod +x Launcher-3.2.beta2-debug.run

Type :
./Launcher-3.2.beta2-debug.run

Enter the appropriate password “frontrow”  and answer “Y” when it asks to restart the finder.

4) From your ATV Menu> Launcher > Downloads, install Boxee alpha 0.9.14.6992.

Note: Please do not select the Launcher 3.1

5) Launch Boxee  from ATV Menu >Launcher >Boxee .

[via Boxee Support forum]

Others working in 3.0

• Patchstick created with OS 2.1 (SSH enabled; accessing AppleTV with Cyberduck (sftp) works great)
• Patchstick created with OS 3.0
• QuickTime components
• Composite Colour
• AppleFileShare Server (AFP) (working using afpinstall.sh and ATV-Recover image)
• LaunchMore! 0.4 (with ATV firmware 3.0)
• atvPWN (Not all of the plugins that can be installed through the latest atvPwn are actually compatible with 3.0)

Not working:

• ATVFiles
• aTV Flash (they say an update should be available by the end of the week)
• Sapphire
• Software Menu

In case you needed to downgrade back to firmware version 2.4.

UPDATE:

aTV Flash 4.0 Released!
Highlights: 3.0 AppleTV compatibility, improved update process, VNC server + bug fixes.

UPDATE 2

Patchstick 3.0 Update 3.0 released.
ATV 3.0 support, MobileAir Mouse, Bit torrent incl. Web UI, Boxee, XBMC and more.

UPDATE 3

Sapphire Browser beta 7.6 now supports AppleTV 3.0

The post Apple TV 3.0 – nitoTV, XBMC, Boxee and others now working appeared first on Apple TV Hacks.

Patchstick.ca has released the first Twitter client for the Apple TV – aTVitter.

For the present, the application lets you access and display the three timelines: friends’ timeline,  your own timeline and the public timeline.

It’s also possible to display the detail view of a selected tweet.

In order to read your and your friends’ timeline, you need to login to your twitter account using the “Settings” menu. To logout, simply delete the current user name in the Setting menu.

aTVitter also provides full iPhone integration for the Twitter account maintenance.

aTVitter it’s free and can be installed via the free base version of PatchStick 3.0 as well as via the newest Update 2.4a

Patchstick’s team ensure they are working hard to release more features soon. Full Twitter account management would be nice and the layout improvement – more than welcome.

Contact patchstick.ca to post suggestions, opinions and ideas of any kind.

The post aTVitter – the first Twitter client for Apple TV appeared first on Apple TV Hacks.

On his blog dannyruchtie.nl, Danny has published short but exhaustive tutorial on how to hack the Apple TV to run boxee, XBMC and enable an external hard drive.

In just four steps he explains how to create and install a patchstick, access Apple TV and enable external USB drives. He ensures the whole process is completely free.

Read the article here.

The post Hacking Apple TV to run boxee, XBMC and enable an external hard drive appeared first on Apple TV Hacks.