Firecore

Seas0nPass is open source (the source code is available on Github) and is available for free.

Here are the instructions on how to use Seas0nPass to jailbreak the Apple TV 2:

Pre-launch checklist

1. Download and install the latest version of iTunes.
2. Download Seas0nPass
3. A micro USB cable will be required to complete the jailbreak.

Jailbreaking

Step 1: Unzip the ‘Seas0nPass.zip’ file and launch Seas0nPass.

Step 2: Select ‘Create IPSW’ (“Boot Tethered” is for old, tethered jailbreak).Step 3: The latest AppleTV software will be downloaded and used to create a custom ‘jailbroken’ software file.

Step 4: When prompted, connect your AppleTV using a micro-USB cable (leave power disconnected), and hold both the ‘MENU’ and ‘PLAY/PAUSE’ buttons for 7 seven seconds.

Step 5: iTunes will open automatically and start the restore process.

Step 6: iTunes will confirm the restore when complete – your AppleTV is now jailbroken.

You may also want to read:
How to jailbreak Apple TV 2 with greenpois0n rc6
How to install XBMC on Apple TV 2
Seas0nPass Troubleshooting Tips
aTV Flash (black) for Apple TV 2G Now Available (+giveaway)

The post How to Jailbreak Apple TV 2 on iOS 4.2.1 Untethered with Seas0nPass appeared first on Apple TV Hacks.

Here are the tips:

1. Some users have reported issues with ‘wifi sync’ enabled. Disabling this (if currently in use) seems to resolve a number of issues related to restoring in iTunes.

2. If you’re getting errors when creating the IPSW, please try the fix found here: https://forum.firecore.com/topic/3761#comment-13581

3. During the JB/restore process, once the Apple TV is put into DFU mode a special script takes over to automate the iTunes restore process. This process can be interrupted if you click away from the iTunes window before the actual restore has begun. Once the AppleTV restore (in iTunes) is underway it is ok to click away from the iTunes window. Update: This process will be improved in the next version of Seas0nPass.

4. When performing a tethered boot timing seems to be important. You will want to ensure the power cable is not connected until you get the rapid flashing light. Also, the HDMI cable needs to be connected promptly once the tethered boot process is complete, and before the white light on the AppleTV stops flashing.

5. The bug relating to the AppleTV forgetting wireless networks has been a known issue in all AppleTV jailbreaks to this point. Update: The wifi bug was partially fixed in 0.6.6. The AppleTV will automatically rejoin networks after a full restart, however the wireless network may still drop off when returning from an extended sleep. We’re currently looking into a more complete fix.

Note: If after all this you’re still having trouble please open a support ticket and send us the Seas0nPass log file found at: ~/Library/Logs/SP_Debug.log.

[source: Firecore]

You may also want to read
How to jailbreak Apple TV 2 on iOS 4.2.1 with Seas0nPass
How-To: Jailbreak Apple TV 2G on iOS 4.2.1 with PwnageTool
AirFlick Streams Non-iTunes Data to Apple TV 2 (video)

The post Seas0nPass Troubleshooting Tips appeared first on Apple TV Hacks.

Seas0nPass is available for free, and is open source (the source code is available on Github). It’s Mac only (OSX 10.6 or later) for now but the Windows version should be released soon.

Here are the instructions on how to use Seas0nPass to jailbreak the Apple TV 2:

NOTE: users are experiencing many kinds of problems with jailbreaking using Seas0nPass. Read the comments on FireCore’s blog before you decide to try the software on your own device.

Pre-launch checklist

1. Download and install the latest version of iTunes (check for updates through Software Update located in Apple menu).
2. Download Seas0nPass
3. A micro USB cable will be required to complete the jailbreak.

Jailbreaking

Step 1: Unzip the ‘Seas0nPass.zip’ file and launch Seas0nPass.

Step 2: If your AppleTV is not yet jailbroken, select ‘Create IPSW’. (if already jailbroken, and you just need to do a ‘tethered boot’ scroll down).

Step 3: The latest AppleTV software will be downloaded and used to create a custom ‘jailbroken’ software file.

Step 4: When prompted, connect your AppleTV using a micro-USB cable (leave power disconnected), and hold both the ‘MENU’ and ‘PLAY/PAUSE’ buttons for 7 seven seconds.

Step 5: iTunes will open automatically and start the restore process.

Step 6: iTunes will confirm the restore when complete – your AppleTV is now jailbroken. Please proceed to the ‘tethered boot’ section below.

Using Seas0nPass for a ‘tethered boot’

Some AppleTV software versions require a tethered boot. This means the AppleTV must be connected to a computer for a brief moment during startup.

Note: The AppleTV MUST be disconnected from the computer (for at least a brief moment) after restoring in iTunes for the tethered boot process below to work properly.

Step 1: Open Seas0nPass and select the ‘Boot Tethered’ option.

Step 2: When prompted, connect the AppleTV to your computer via USB. Wait for the rapid flashing light then connect the power. Once both are connected hold both the ‘MENU’ and ‘PLAY/PAUSE’ buttons for 7 seven seconds.

Step 3: Seas0n Pass will complete the tethered boot automatically. Once complete, remove the USB cable and connect the HDMI cable.

You may also want to read:
How-To: Jailbreak Apple TV 2G on iOS 4.2.1 with PwnageTool
AirPlay Streaming Hacked into the Old Apple TV (updated: giveaway!)
AirFlick Streams Non-iTunes Data to Apple TV 2 (video)
AirVideoEnabler Allows AirPlay Video Streaming from Any App

The post How to jailbreak Apple TV 2 on iOS 4.2.1 with Seas0nPass appeared first on Apple TV Hacks.

Here are the instructions from nitoTV

Disclaimer:
If you do not have your SHSH blobs backed up for your AppleTV at 4.1 I HIGHLY advise avoiding any upgrading whatsoever, tethered or not, until a real proper jailbreak is available.

If you don’t understand the above GO BACK NOW, do NOT attempt the following.

Made it this far? Another warning:
If you aren’t a developer or someone trying to tweak iOS 4.2.1 the following jailbreak is STRONGLY discouraged. Booting tethered on the AppleTV is an easy process, but it is still a PITA that a casual user would probably not have the desire to put up with.

Read the ENTIRE documentation at least once before running through the process.

You will need a computer that is close enough to your AppleTV that it can be plugged into USB, power and HDMI without any major movement of the AppleTV itself), if you don’t meet this requirement the following is impossible, unless your microUSB cable is REALLY long.

Required:
A MicroUSB cable
An Intel Apple laptop Running Snow Leopard (I say laptop because of reaching distance for the USB, power, HDMI)
AppleTV 4.2.1 ipsw AppleTV2,1_4.2.1_8C154_Restore.ipsw
PwnageTool 4.1.2 or 4.1.3
PwnageTool 4.2.1 Bundle for Apple TV 2G

1. Move this entire folder to the desktop and replace “AppleTV2,1_4.2_8C150.bundle” subfolder with this “AppleTV2,1_4.2.1_8C154.bundle” subfolder.

2. Open Terminal app (if you don’t know where this is, you REALLY shouldn’t be doing this.

3. Run the following commands (this will fail if you didn’t move this folder to the desktop, PwnageTool almost MUST be in your /Applications folder)

4. Run PwnageTool on the 4.2.1 ipsw (if you don’t know how to do this, again you REALLY shouldn’t be here) saving into the ~/Desktop/tethered folder with the default name PwnageTool gives it (AppleTV2,1_4.2.1_8C154_Custom_Restore.ipsw

5. Back in the terminal run the following:

unzip -j ~/Desktop/tethered/AppleTV2,1_4.2.1_8C154_Custom_Restore.ipsw Firmware/dfu/iBSS.k66ap.RELEASE.dfu kernelcache.release.k66 -d ~/Desktop/tethered/

6. Restore the AppleTV to the ~/Desktop/tethered/AppleTV2,1_4.2.1_8C154_Custom_Restore.ipsw firmware (your AppleTV SHOULD be in DFU mode after finishing up with PwnageTool)

NOTE: Do not install any packages through cydia in expert mode, this produced very unpredictable results.

7. Unplug and then replug the USB, after the AppleTV has finished started up (will be blinking steadily), plug in the power cable

8. Run the following commands in terminal:

cd ~/desktop/tethered

./tetheredboot -i iBSS.k66ap.RELEASE.dfu -k kernelcache.release.k66

NOTE:  it will loop a complaint re: DFU mode, just ignore this, once you are finished getting in DFU mode tetheredboot will take over.

9. MANUALLY put the AppleTV in DFU (*DO NOT USE PWNAGETOOL*)

– Disconnect power cable and connect your Apple TV with your computer via microUSB
– Now reboot your Apple TV by holding down Menu + Down buttons together for around 6 seconds.
– After reboot, immediately hold Menu + Play until you see the message in iTunes saying that Apple TV in recovery mode is detected

Successful output from tetheredboot looks like this:

Initializing libpois0n
No matching processes belonging to you were found
Waiting for device to enter DFU mode
Device must be in DFU mode to continue
opening device 05ac:1227…
Found device in DFU mode
Checking if device is compatible with this jailbreak
Checking the device type
Identified device as AppleTV2,1
Preparing to upload limera1n exploit
Resetting device counters
Sending chunk headers
Sending exploit payload
Sending fake data
libusb:error [darwin_transfer_status] transfer error: timed out
Exploit sent
Reconnecting to device
Waiting 2 seconds for the device to pop up…
opening device 05ac:1227…
Uploading iBSS.k66ap.RELEASE.dfu to device
[==================================================] 100.0%
libusb:error [darwin_reset_device] ResetDevice: device not responding
libusb:error [darwin_close] USBDeviceClose: no connection to an IOService
Waiting 10 seconds for the device to pop up…
opening device 05ac:1281…
Setting to configuration 1
Setting to interface 0:0
Uploading kernelcache.release.k66 to device
[==================================================] 100.0%
libusb:error [darwin_transfer_status] transfer error: device not responding (value = 0xe00002ed)

10. if all went well, unplug USB and plug in HDMI and your AppleTV should be ready to go. You will need to repeat 7-9 every time you restart your AppleTV, this isn’t a convenient process by any stretch!

11. To get nitoTV installed (I couldn’t get the cydia, or custompackage sot work in PT)

apt-get install wget
wget -O- https://apt.awkwardtv.org/awkwardtv.pub | apt-key add –
echo “deb https://apt.awkwardtv.org/ stable main” > /etc/apt/sources.list.d/awkwardtv.list
apt-get update
apt-get install com.nito.nitotv

[source: @nitoTV]

The post How-To: Jailbreak Apple TV 2G on iOS 4.2.1 with PwnageTool appeared first on Apple TV Hacks.